For Burrus/Vortex/Docter Micro Red...
For Burrus/Vortex/Docter Micro Red Dots
This model fits the following optics:
Burris Fastfire 2 & 3, Vortex Venom & Viper, Docter, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot Pro M-Spec, ADE RD3
This rib mount fits ribs between 6mm (.236") and 3/8" (.375") wide.
Warning: Last items in stock!
These mounts require no drilling and tapping, they simply clamp to the rib on the barrel and stay tight all season.
This rib mount fits ribs between 6mm (.236") and 3/8" (.375") wide. This includes but is not limited to pump and semi-auto shotguns by Benelli, Beretta, Browning (except Maxus), Franchi, Mossberg, Remington, Retay, Savage/Stevens, Stoeger, Tristar, Weatherby, Winchester, & more as well as Browning Cynergy, Stevens 555, & Tristar Upland Hunter over/under shotguns.
Many over/under shotguns do not have a large enough gap under the rib for the bottom mounting plate but we will have these available shortly. If your over/under has at least a 5/64" gap between the bottom of the rib and the top of the barrel as well as a 1.25" gap between rib supports our mounts will work. If you do not have a good way to measure that you can use a 5/64" allen key.
Package includes Top Plate, Bottom Plate, Rib Adapter Kit (5 total adapters for 6mm, 1/4", .270", .291"(Remington), & 8mm ribs), 4 mounting screws, Allen wrench, and Loctite. There is no Rib Adapter needed for 3/8" wide ribs, simply use the mount without it.
NEW FOR 2021 - All mounts are "universal" meaning they fit almost any rib between 6mm and 3/8". The mounts are slotted to aid with alignment on the rib and use a plate that clamps on the bottom side of the rib. The mounts come with our Rib Adapters which ensure centering on the rib and make installation a breeze.